Product features:

The built-in wear-resistant lining plate in the pump cavity can effectively protect the pump cavity from wear, prolong the service life of the pump and reduce the later use cost. It can be maintained online, and the parts can be checked or replaced by opening the pump cover. There is no need to lift the equipment and remove the pump from the pipeline. It is convenient for maintenance and saves a lot of maintenance time. The spiral rotor runs smoothly with stable pressure and flow. Compact structure, small floor area, easy to install and transport pipeline routing. It can realize the mixed transportation of gas, liquid and solid. Such as massive materials, fibers, hair, etc., will not block. The pump can rotate forward and backward, the inlet and outlet can be interchanged, and the two functions of loading and unloading can be realized at the same time. It can transport medium with viscosity ≤ 2 million CP. It has strong self-priming ability, and the suction range can reach 8.5 meters. Independent seal cavity design, keep the seal face lubrication, idle for 15 minutes will not produce any damage to the pump. The rotor and pump body can be made of corresponding materials according to different conveying conditions.

Application fields:

Environmental protection: municipal sewage, chemical wastewater, lime slurry, precipitated sludge, thickened sludge, etc.

Petrochemical Industry: heavy oil, heavy oil, source oil, fuel oil, lubricating oil, asphalt, sludge, oil, catalyst, multicomponent oil, etc.

Papermaking: polyacrylic size, sizing solution, rosin size, paper, coating, amine emulsion, defoamer, filter aid, water treatment chemicals, etc.

Food: dairy products, fruit juice, puree, concentrated juice, cream, syrup, chocolate, ice cream, condensed milk, condiment, distiller's grains, soybean protein, mushroom powder, etc.

Daily chemical products: AES, MES, AOS, Las, K12, glycerin, fatty alcohol, detergent, facial cleanser, shower gel, shampoo, toothpaste, soap, detergent slurry, etc.

Fine chemicals: dyes, pigments, sodium, adhesives, silicone oil, leather oil, emulsion explosives, etc.

Chemical fiber: glass fiber, viscose paste, PVA, vinylon size, refined fiber size, spandex size, polymer chip, man-made fiber, etc.

Pharmaceutical: ointment, extract, medicine emulsion, pill paste, medicament and so on. Coating: paint, paint, ink, resin, additives, organic solvents, etc.

Fire fighting: foam pump and fire pump.

The driving force of the mobile rotor pump comes from its own two fan blades rotating in the opposite direction at the same time. During the whole process of rotation, it creates strong adsorption force in the import area. Therefore, it can absorb necessary chemicals and carry out transportation. The rotor pump operates continuously, All the necessary goods will be transported to the necessary areas. Before you run, we have to check whether the oil in the gearbox is sufficient, and the lubricating oil should be removed and replaced on time. The general removal and replacement time is about 4000 hours. Before operation, the water gate at the inlet and outlet of the pipeline should be opened. When the material enters, we need to be good at rotating the rotor pump to ensure that everything is normal before the operation can be declared, and the operation can not be carried out under the condition of empty pump. There is also a rotor pump in the whole process of operation must pay attention to, corrosion-resistant rotor pump price in the case of operation, we should pay attention to the output power of the motor and its operation to the state, if there is abnormal need to stop running to search for the reason. The pump shell with rotary seal can allow one to three drops per minute. If it exceeds, the material ring should be compressed. There should be no leakage and scalding of the machine seal.