Home >Products >HEP1 Emulsification pump >HEP1 Homogenizing Emulsifying Pump

HEP1 Homogenizing Emulsifying Pump

Item No: HLS-B009

Details
The pump cavity of hep1 homogeneous emulsion pump is equipped with a set of double stator and double rotor. The internal stress of rotor stator and cavity source materials can be eliminated by forging
Message
Introduction

Description

Features

Helsh-Tech

1. The cam rotor pump has been inspected and tested before it is manufactured in the factory. It should be installed properly, otherwise it will cause great vibration of the pump and endanger the service life. 2. There should be a plane for the installation of the pump. Therefore, according to the installation specifications, four basic holes should be excavated first, and then the foundation screw should be put into the pouring concrete. After the concrete is completely dry, the general car chassis should be adjusted to the level position with iron pad, and then the foundation screw should be tightened evenly. 3. The price of the sewage rotor pump should be installed within 3 meters below the storage tank, and the diameter of the water inlet should exceed the diameter of the No. 2 pump inlet, so as to prevent the water inflow from blocking or cavitation. 4. The pipeline connecting the pump should have its own support frame, and the pump shell can not be used as the water pipe support. 5. To ensure that the pump shell and motor will not be damaged, please install the valve at the pump outlet and show the over-current protection equipment. 6. When installing the pump, a vacuum gauge should be installed at the inlet and a pressure gauge at the outlet to check the operation of the pump. The instrument valve shall be installed in front of the pressure gauge and vacuum gauge to facilitate the removal and replacement of damaged pressure gauge. 7. After the installation of the cam pump, please ground the motor at the grounding mark in accordance with the national defense and safety grounding requirements. 8. When the requirements belong to the mobile application, the inlet and outlet pipes are connected with plastic hose, and the gate valve and pressure gauge are not installed. Flexible rotor pump manufacturers are equipped with four wheels under the pump bottom plate (including two universal casters), which can only be towed on the flat ground. If the road surface is crooked or dragged around a big turn, you should pay attention to avoid toppling and landslides.


 

Mainly Product

Designed for Low-to-High Viscosity Media

General Appearance Cam Lobe Pump

The General Appearance Cam Lobe Pump is the most popular choice among users. This type of pump is mainly configured with a horizontal left-right inlet and outlet direction. The commonly used connectio

More+

Top Inlet and Outlet Cam Lobe Pump

The Top Inlet and Outlet Cam Lobe Pump is specifically designed for special inlet and outlet piping arrangements. When there is material in the pipeline, this pump has excellent self-priming capabilit

More+

HEP1 Homogenizing Emulsifying Pump

The pump cavity of hep1 homogeneous emulsion pump is equipped with a set of double stator and double rotor. The internal stress of rotor stator and cavity source materials can be eliminated by forging

More+

Enlarged Inlet Model - Cam Lobe Pump

The inlet of the enlarged inlet cam lobe pump is specially processed to effectively expand the feeding area. Coupled with two-lobed arcuate or butterfly-shaped rotors, it can better transpor

More+

Right-angle Gear Reducer Model - Cam Lobe Pump

The main feature of the right-angle gear reducer cam lobe pump is its short horizontal axial installation space, which meets the special requirements for installation space in certain applications. Ad

More+

Seal cooling & pressure system - cam lobe pump

The cam lobe pump with a mechanical seal circulation cooling and pressure maintaining system is primarily used in applications with high requirements for pump sealing. The pump is equipped with a mech

More+

Mobile Hopper & VFD Cam Lobe Pump

The product is equipped with a thermal insulation device, which can heat the pump body through steam, hot water or hot oil to make the material flow better, prevent the material from solidifying in th

More+

HEP3 Homogenizing Emulsifying Pump

There are three groups of rotors and stators in the working cavity of HEp3 homogeneous emulsion pump. Each rotor has two layers of toothed discs. There are 12 layers of toothed discs in the three grou

More+

Working principle diagram

The pump cavity of hep1 homogeneous emulsion pump is equipped with a set of double stator and double rotor. The internal stress of rotor stator and cavity source materials can be eliminated by forging

More+

Working principle diagram

The pump cavity of hep1 homogeneous emulsion pump is equipped with a set of double stator and double rotor. The internal stress of rotor stator and cavity source materials can be eliminated by forging

More+

Messages

Thank you for your attention to HELSH-TECH. If you have any opinions or suggestions, please leave us a message.