Ningbo Emulsion Pump Manufacturer states that an emulsion system is a pipeline equipment used to address issues with fine materials in production processing scales or circulation systems. The emulsion system can disperse, cut, and emulsify materials in a short time through the strong shear stress generated by the high-speed operation of the rotor and stator, making it widely used in industries such as daily chemicals, food, chemical plants, crude oil, and architectural coatings.

During daily production, due to the aging of the emulsion system or improper use, high-quality triplex high-pressure pumps are prone to common faults. Therefore, Ningbo Emulsion Pump Manufacturer will show you how to minimize the abnormalities of emulsion pumps:

1.Ningbo Emulsion Pump Manufacturer advises that before using the emulsion pump, the pump casing should be clean and tidy.

2.The pump head should only be started after the cooling water is circulating to prevent the machine seal from cracking and damaging.

3.After plugging in, be cautious of any pump head reversal. If the pump head reverses, immediately shut down, rewire, and restart.

4.When the emulsion pump is operating, materials containing slurry or small packages are not allowed to directly enter the pump chamber. The materials to be emulsified by the emulsion pump must be liquids. Dry and abrasive solid materials can cause the rotor of the emulsion system to get stuck, resulting in motor damage.

5.During normal operation of the emulsion pump, observe the system for any leakage. If the supplier of the adiabatic rotor pump discovers any leakage, immediately stop the mechanical equipment, inspect and eliminate the cause, and replace the mechanical seal.

6.If the emulsion system makes abnormal noise during use, carefully check for common faults in the spare parts.

7.After each production cycle, the internal structure of the pump chamber should be cleaned and tidy to maintain the efficiency of the stator and motor rotor, as well as the mechanical seal.

8.Regularly maintain the stator and motor rotor. If significant damage is found, immediately disassemble and replace the corresponding parts to ensure the actual effect of dispersion and emulsification.

9.Before using this machinery and equipment, users of professional stainless steel rotor pumps should formulate corresponding safety operating procedures to ensure the safety of operators and facilities.