FGS Rubber Rotor Pump
Item No.：
HLS-G006
Category：
Summary
TEL：
TEL/Whatsapp/Wechat：
E-mail.：
Product Detail
- Description
- Performance
- Parameters
-
- Commodity name: FGS Rubber Rotor Pump
- Commodity ID: HLS-G006
The built-in wear-resistant lining plate in the pump cavity can effectively protect the pump cavity from wear, prolong the service life of the pump and reduce the later use cost. It can be maintained online, and the parts can be checked or replaced by opening the pump cover.
Product features:
The built-in wear-resistant lining plate in the pump cavity can effectively protect the pump cavity from wear, prolong the service life of the pump and reduce the later use cost. It can be maintained online, and the parts can be checked or replaced by opening the pump cover. There is no need to lift the equipment and remove the pump from the pipeline. It is convenient for maintenance and saves a lot of maintenance time. The spiral rotor runs smoothly with stable pressure and flow. Compact structure, small floor area, easy to install and transport pipeline routing. It can realize the mixed transportation of gas, liquid and solid. Such as massive materials, fibers, hair, etc., will not block. The pump can rotate forward and backward, the inlet and outlet can be interchanged, and the two functions of loading and unloading can be realized at the same time. It can transport medium with viscosity ≤ 2 million CP. It has strong self-priming ability, and the suction range can reach 8.5 meters. Independent seal cavity design, keep the seal face lubrication, idle for 15 minutes will not produce any damage to the pump. The rotor and pump body can be made of corresponding materials according to different conveying conditions.
Application fields:Environmental protection: municipal sewage, chemical wastewater, lime slurry, precipitated sludge, thickened sludge, etc.
Petrochemical Industry: heavy oil, heavy oil, source oil, fuel oil, lubricating oil, asphalt, sludge, oil, catalyst, multicomponent oil, etc.
Papermaking: polyacrylic size, sizing solution, rosin size, paper, coating, amine emulsion, defoamer, filter aid, water treatment chemicals, etc.
Food: dairy products, fruit juice, puree, concentrated juice, cream, syrup, chocolate, ice cream, condensed milk, condiment, distiller's grains, soybean protein, mushroom powder, etc.
Daily chemical products: AES, MES, AOS, Las, K12, glycerin, fatty alcohol, detergent, facial cleanser, shower gel, shampoo, toothpaste, soap, detergent slurry, etc.
Fine chemicals: dyes, pigments, sodium, adhesives, silicone oil, leather oil, emulsion explosives, etc.
Chemical fiber: glass fiber, viscose paste, PVA, vinylon size, refined fiber size, spandex size, polymer chip, man-made fiber, etc.
Pharmaceutical: ointment, extract, medicine emulsion, pill paste, medicament and so on. Coating: paint, paint, ink, resin, additives, organic solvents, etc.
Fire fighting: foam pump and fire pump.
-
As a wholesale manufacturer of double rotor pump, the application of rotor pump immediately endangers the service life of rotor pump. So do you have to pay attention to any problems when mastering the application of rotor pump? First of all, before you run, we have to check whether the oil in the gearbox is sufficient, and the lubricating oil should be removed and replaced on time. The general removal and replacement time is about 4000 hours. Before operation, the water gate at the inlet and outlet of the pipeline should be opened. When the material enters, we need to be good at rotating the rotor pump to ensure that everything is normal before the operation can be declared, and the operation can not be carried out under the condition of empty pump. There is also something that we must pay attention to during the whole operation process of the rotor pump. In the case of operation, we should pay attention to the output power of the motor and its operation condition. If there is any abnormality, we need to stop running to search for the cause. With the rotary seal of the diesel engine rotor pump shell, can allow each minute one to three drops, if exceed should compress ring. There should be no leakage and scalding of the machine seal.
-
MAIN PRODUCTS
EXPLORE OUR PRODUCT LINEUP
Rotary Lobe Pump
The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.
Learn More +
Rotary Lobe Pump
The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.
Learn More +
Rotary Lobe Pump
The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.
Learn More +
Rotary Lobe Pump
The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.
Learn More +Copyright © 2022 Ningbo Helsh—Tech Fluid Co., Ltd. All Rights Reserved. 浙ICP备2021012840号 Powered by www.300.cn SEO
MESSAGE
