+
  • hls_005.jpg

Rotary Lobe Pump

Item No.:

HLS_005

Category:


Summary

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Product Detail


  • Description
  • Performance
  • Parameters
    • Commodity name: Rotary Lobe Pump
    • Commodity ID: HLS_005

    The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

    Product introduction:

    The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product. According to years of research and experience accumulation, it has determined a series of rotor pumps under different working conditions: chemical type, food type, general type, etc When conveying different media, the product adopts the corresponding configuration, which makes the rotor pump play the characteristics of stability, efficiency and safety in a variety of different application conditions, and provides the majority of users with the solution of fluid transportation in line with the requirements of the actual working conditions.

     

    HLS


    working principle:

    When the two rotors rotate in the opposite direction synchronously, the volume cavity periodically changes from small to large - from large to small to achieve the purpose of conveying fluid. The flow rate of the pump depends on the volume of the working chamber and its changing frequency in unit time, but (theoretically) has nothing to do with the discharge pressure; Driven by the transmission shaft, two rotors (rotor blades are 1-8) rotate in the opposite direction synchronously. In the process of rotation, the volume at the inlet increases from small to large to produce suction (vacuum degree) to absorb materials. After that, the two rotors and the pump cavity form a fixed volume cavity, and the volume at the outlet of the pump decreases from large to small to output materials, forming a higher vacuum degree and conveying pressure.

     

    Application fields:

    *Daily chemical: detergent, washing liquid, shower gel, skin care cream, shampoo, hand sanitizer, toothpaste, soap, detergent slurry, daily chemical raw materials, etc.

    *Fine chemicals: dyes, pigments, adhesives, silicone oil, leather oil, chemical additives, various colloidal materials, various sizes, etc.

    *Food: chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated fruit juice, jam, ice cream, milk, yeast slurry, pulp, jelly, condiment, distiller's grains, soybean protein, flour slurry, etc.

    *Papermaking: polyacrylamide (PAM), gelatinized starch, carboxyl styrene butadiene / styrene butadiene latex, rosin, rosin size, filler, dry strength agent, wet strength agent, sizing agent, retention and drainage aid, defoamer, coating, water treatment chemicals, etc.

    *Chemical fiber: viscose pulp porridge, PVA, vinylon size, acrylic size, polyamide size, polyester chip, polypropylene, man-made fiber, functional fiber, etc.

    * medicine: all kinds of ointment, extract, medicine emulsion, pill paste, syrup, health products, medicament and so on.

    *Coatings: Paints, coatings, inks, insulating paints, resins, additives, organic solvents, etc.

     

    HLS

  • Product features:

    There is a certain gap between the rotor and the pump body, between the rotor and the rotor, no contact, no friction, long service life.

    No need to dismantle the pipe, open the pump cover to repair, convenient maintenance and cleaning, less vulnerable parts.

    Low energy loss, high efficiency, low failure rate, reliable sealing and low noise. It can transport high viscosity, high concentration, containing soft solid particles and other materials with poor fluidity.

    The output flow of the pump can be changed within a certain range by adjusting the pump speed, and can be used as a general metering pump.

    It can be equipped with flange type, screw type, clamp type and other types of connection, and the in and out direction can be horizontal or vertical.

    It can transport gas, liquid and solid mixed materials and transport a wide range of materials. Built in thermal insulation cooling structure design, good thermal conductivity, easy installation. It can be equipped with sanitary safety valve and pump valve, and the pressure overload protection of pipeline system is simpler.

    The rotor and pump cavity can transport the medium containing solid particles such as sludge and sewage after using special materials and technology.

    1. Pay attention to the import and export trade of rotor pump. When the import and export trade is wrong, the medium will not flow and will not feed. 2. At present, most of the rotorpumps produced by sanitary rotorpump factory are motor drive system, so it is necessary to ensure the connection between pump and motor, adjust the coaxiality and keep the pump and motor in the same plane. 3. Timely maintenance can make the rotor pump deal with the existing problems in time, and then take precautions. 4. Before the application of the rotor pump, the medium should enter into the channel to prevent the rotor pump from dry running and high speed, which is very serious to the damage of the pump. Customers should pay attention to this problem when applying the rotor pump. 5. Revolution problem: every rotor pump has its matching speed ratio. Customers should know the high-speed rotation value of the pump in the whole process of application. It is not necessary to overload the rotor pump. Only when the on-site work speed ratio is less than high revolution can the pump operate healthily. In addition, the centrifugal impeller of cycloid rotor pump is separated from the transmission gear of the transmission system, and there is a certain gap between the spare parts in the pump cavity, so that they do not touch each other, cause damage, low noise, good stability, long service life, energy saving and emission reduction. Equipped with a soft starter, the total flow can be adjusted at will, and can be used as a general dosing pump. It can transport vapor, liquid, solid and other three-phase compound materials.

  • HLS


MAIN PRODUCTS

EXPLORE OUR PRODUCT LINEUP


图片名称

Rotary Lobe Pump

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Learn More +
图片名称

Rotary Lobe Pump

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Learn More +
图片名称

Rotary Lobe Pump

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Learn More +
图片名称

Rotary Lobe Pump

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Learn More +

Online Message


Thank you for your attention to Helsh-Tech, if you have any comments or suggestions, please leave us a message

Submit