Product Category

Rotary Lobe Pump

Item No.：

HLS_08

Category：

TRP Rotary Lobe Pump

Summary

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

TEL：

+86-574-86906070

TEL/Whatsapp/Wechat：

+8613656885558

E-mail.：

hls@helsh-tech.com

Product Detail

Description
Performance
Parameters

- Commodity name: Rotary Lobe Pump
- Commodity ID: HLS_08
The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product.

Product introduction:

The rotary Lobe Pump is a kind of positive displacement pump. There is a pair of synchronous counter rotating cams in the pump cavity. Hollysys fluid technology has always been committed to combining the product with practical application, continuously upgrading and improving the product. According to years of research and experience accumulation, it has determined a series of rotor pumps under different working conditions: chemical type, food type, general type, etc When conveying different media, the product adopts the corresponding configuration, which makes the rotor pump play the characteristics of stability, efficiency and safety in a variety of different application conditions, and provides the majority of users with the solution of fluid transportation in line with the requirements of the actual working conditions.

working principle:

When the two rotors rotate in the opposite direction synchronously, the volume cavity periodically changes from small to large - from large to small to achieve the purpose of conveying fluid. The flow rate of the pump depends on the volume of the working chamber and its changing frequency in unit time, but (theoretically) has nothing to do with the discharge pressure; Driven by the transmission shaft, two rotors (rotor blades are 1-8) rotate in the opposite direction synchronously. In the process of rotation, the volume at the inlet increases from small to large to produce suction (vacuum degree) to absorb materials. After that, the two rotors and the pump cavity form a fixed volume cavity, and the volume at the outlet of the pump decreases from large to small to output materials, forming a higher vacuum degree and conveying pressure.

Application fields:

*Daily chemical: detergent, washing liquid, shower gel, skin care cream, shampoo, hand sanitizer, toothpaste, soap, detergent slurry, daily chemical raw materials, etc.

*Fine chemicals: dyes, pigments, adhesives, silicone oil, leather oil, chemical additives, various colloidal materials, various sizes, etc.

*Food: chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated fruit juice, jam, ice cream, milk, yeast slurry, pulp, jelly, condiment, distiller's grains, soybean protein, flour slurry, etc.

*Papermaking: polyacrylamide (PAM), gelatinized starch, carboxyl styrene butadiene / styrene butadiene latex, rosin, rosin size, filler, dry strength agent, wet strength agent, sizing agent, retention and drainage aid, defoamer, coating, water treatment chemicals, etc.

*Chemical fiber: viscose pulp porridge, PVA, vinylon size, acrylic size, polyamide size, polyester chip, polypropylene, man-made fiber, functional fiber, etc.

* medicine: all kinds of ointment, extract, medicine emulsion, pill paste, syrup, health products, medicament and so on.

*Coatings: Paints, coatings, inks, insulating paints, resins, additives, organic solvents, etc.
Product features:

There is a certain gap between the rotor and the pump body, between the rotor and the rotor, no contact, no friction, long service life.

No need to dismantle the pipe, open the pump cover to repair, convenient maintenance and cleaning, less vulnerable parts.

Low energy loss, high efficiency, low failure rate, reliable sealing and low noise. It can transport high viscosity, high concentration, containing soft solid particles and other materials with poor fluidity.

The output flow of the pump can be changed within a certain range by adjusting the pump speed, and can be used as a general metering pump.

It can be equipped with flange type, screw type, clamp type and other types of connection, and the in and out direction can be horizontal or vertical.

It can transport gas, liquid and solid mixed materials and transport a wide range of materials. Built in thermal insulation cooling structure design, good thermal conductivity, easy installation. It can be equipped with sanitary safety valve and pump valve, and the pressure overload protection of pipeline system is simpler.

The rotor and pump cavity can transport the medium containing solid particles such as sludge and sewage after using special materials and technology.

Flexible rotor pump price technology abroad has been very perfect, design products, production has long been universal. Commodities have long been used in agricultural irrigation, sand slurry transportation, river embankment sand drainage, coal mine drainage pipeline and oil mining. Even if the project cost is high, but because of the advantages of service life and maintenance, the total operating cost is low. Overseas research on rotor profile of rotorpump has already been very perfect, and the research is still increasing. In addition, we are carrying out the research on new rotor profile. The key point is to focus on the stable and constant fluidity of high viscosity and cutting sensitive medium in the pump, so as to ensure that the quality of the medium passing through the pump will not change. Moreover, according to the materials of micro rotor pump manufacturers, overseas research on twisted blade rotor pump has been gradually developed. At the present stage, non-contact rotor pump, as the key centrifugal fan and mechanical pump in China, is rarely used in the medium transportation industry. Most of the manufacturers carry out surveying and mapping engineering and manufacturing after ordering overseas products, and basically do not carry out in-depth research on the rotor profile. The characteristics of the products are very different from those overseas.